Hooded Baby Towel and Wash Mitt

This relatively easy to sew duo would make a lovely handmade gift for a new baby or expecting mother.  Plus they're also a perfect chance to practice your bias tape binding skills! 

Place the set in a sweet basket along with my very favorite baby soaps and it's certain to be a cherished receiving gift. 

This new 100% cotton, terry velour fabric is so soft and cuddly that it almost makes me want to have another baby just so I can snuggle him or her inside it...

...yeah I know, I'm constantly debating another baby. Oh, those tiny little fingers and toes... and adorable little animal prints, cuddly fabrics and cute baby projects are so tormenting. They certainly help to tally up the pro's column in the poll I take in my mind.

Come to think of it, I have been oohing and ahhing over other peoples babies quite a bit lately, perhaps because mine is turning into such a big girl! :(  Don't tell her I said so though. She's really into being small right now. She's constantly saying "I'm tiny" and I say "Yes, you are. You're my tiny girl." ♥

She's still my baby. She still lets me rock her and snuggle her. 

I tell her she'll always be my baby, just like I remember my mother telling me. And she will be, just as I am. 

And we'll all be our mothers babies in someway, no matter how big (or old) we grow.

Happy Mothers Day.

Here's what you need: 

*1 1/2 yards of 60" wide terry velour by Spechler Vogel, this is enough for 2 towels and a mitt. 

One fun fat quarter, cotton print or a large enough scrap to cut an 11x11x16" triangle.

130" of bias tape or 1/2 yard of fabric to make your binding (since the towel has no curved edges I did NOT cut my tape strips on the bias, this saves both fabric and energy).

Coordinating thread

A rottery cuter, acrylic rule and cutting mat

Fabric shears

Pins 

and a sewing machine

+ scrap paper and pen for drafting your Wash Mitt templet

Here's how it's made:

The Towel

Select you fabrics. For this project I've used a 100% cotton, extra wide terry velour material from Spechler and Vogel. It is wonderful because the terry side is nice and absorbent while the velour side is oh, so cuddly!! Also for this towel I've used a fun hedgehog print and a red gingham flannel, both from Michael Miller.

First: Cut a 30"x 30" square from your terry velour; if you are using the 60" wide terry you can cut it straight down the center fold, then cut two 30" squares at once. Do to the salvage edge you may not end up with an exact square, as long as it's close it wont be noticeable.

From your printed cotton cut an 11"x11"x16" triangle. Pay attention to the direction of the print. I've made my 16" cut across the fabrics grain and two 11" cuts on the bias so that when the hood is up the hedgies aren't slanting sideways. 

Cut another 11"x11"x16" triangle from the terry.

Next with velour side up place your printed triangle face down on top. This way you will end up with a hood lined in extra soft velour, to be nice and gently on new baby skin. Pin bottom edge and stitch with a 1/4" seam allowance. Turn right sides out and press.

Trim off any little triangle tips that stick out or any other discrepancies between the two triangles. Then topstitch, a 1/4" from edge, along the bottom of the hood. 

Next aligned the hood with one of the towels right angles and pin.

Baste in place.

Trim any discrepancies.

Prepare binding.

Attach bias tape with mitered corners. Save you extra bias tape.

Trim out balk seam allowance around hood to allow the tape to neatly encase the raw edges. 

Finish your binding with the final topstitch, take your time neatly forming your mitered corners and making sure all raw edges are tucked in and well encased, if they are not fraying and unraveling might accrue during washing. Save you extra bias tape.

The Wash Mitt

First onto a scrap piece of paper, trace a rounded mitt shape about 2" away from your hand all the way around. Note the mitt I drew here was only an inch larger then my hand and it fits very tightly. 2" extra fits much better :)

Cut mitt shapes from your left over terry cloth.

Place velour sides together, terry sides facing out, pin and stitch 3/8" from edge, leaving bottom open.

Trim seam allowance to about 1/8"-1/4", being careful not to get too close to your stitches. Turn velour side out and stitch another 3/8" from edge.

Using the extra binding tape from your towel, begin attaching it to the open end of the mitt. First fold the sort raw end of the tape back and then pin around the perimeter, sew. 

Take about 4" of tape, top stitch closed, then fold length wise to make a loop. Stitch short ends together.

Turn mitt right (terry) side out.

Pin loop close to one of the side seams (but not all the way at the side seam to avoid too much bulk). Finaly fold binding over raw the edges and topstitch to finish.

Happy Sewing and lovely weekends to you all!

Snuggle your babies once for me,

♥April

How To: Attach Bias Tape (with mitered corners)

Bias tape, also referred to as bias binding, has many practical applications. It is often used in garment sewing, finishing the arm holes of a dress, encasing the top edge of a pocket or bottom edge of a hem. It's also used frequently in home decor and accessory sewing to add the finishing touch to a project, such as a blanket or bag. It is very simple to apply and has a nice, clean finished look. Plus when you use a contrasting tape it becomes a fun design element.

Bias binding is also easy to make yourself so you are not limited to the pre-made, packaged tapes... virtually any cloth will do (though I suggest starting with a standard cotton weight until you are comfortable with the process). Clover tape makers are my preferred tool. They come in many sizes and the directions to make your own are easy to follow. Colette Patterns have also written a great how to make bias tape tutorial, here. When you make your own the binding the possibilities are endless; tiny flowers, polka dots, pinstripes, gingham and any color of kona cotton or a chambray. Have fun.

Here we go...

First completely unfold you bias tape. Here I am using tape I made using a 1" tape maker (ending up with a 1/2" wide binding) in a blue chambray.

Pre-made bias tape and tape made with some bias tape makers (such as Clover brand) will have one side narrower than the other. Visible when first unfolded.

Beginning with the narrower side, align the raw edge of your tape with the raw edge of your project, right sides facing. Fold the short end of your tape down at a 90 degree angle to meet the raw edges (shown above) and start sewing, backstitch.

Sew until you come to about seam-allowance distance away from the corner of your project (in my case 1/4") and backstitch.

Take your project out from under your presser foot, fold your bias tape up and to the right forming a 90 degree angle. Neatly finger press.

Then fold your tape straight out to the left along the raw edge of your base fabric. Pin in place.

Start sewing again along this second edge, seam allowance distance (1/4") in from the corner, backstitch. Note: Don't worry about the 1/4" unstitched portions around the corners. They will be taken care of in the final steps.

Continue around your entire project. When you get to where you started, continue to overlap your tape and sew about 2"- 3" past your starting point, backstitch. Cut off any extra tape.

Refold your bias tape: Flip your project over and refold your tape, encasing all raw edges.

When completely folded your tape should just barley cover your original stitch line. This is the reason for your bias tape having one folded edge slightly narrower and one thicker.

If you have a bias tape maker that does not create one side narrower then the other, you simply need to fold your tape slightly off (not quite in half) and attach the smaller side of your tape first.

Pin your tape neatly as you check to be sure all stitches are hidden underneath.

I like to use extra long flathead pins for this... the longer the pin the less pinning, plus they're cute! Also take care to tuck all corners into a tidy miter as pictured above.

The little boat print here is from Kokka's Trefle Collection (edited)

Finally topstitch, about an 1/8" from the inner edge of your tape, the entire way around your project, backstitching when your stitches meet. Voilà!

Note: You could also finish your bias binding by hand stitching the folded edge to the back of your project. This is a nice option when you don't wish to see any topstitching.